Mercedes SLC200Engine Rebuild— From £2,200
Specialist Mercedes SLC200 engine rebuilds and replacements, with registration-based engine matching, nationwide recovery and a 12-month unlimited-mileage warranty
Rated Mercedes Engine Specialists — 1,800+ Engines Rebuilt
Specialist technicians with 10-15 years of experience
12 Month Unlimited-Mileage Warranty
Nationwide Recovery
Free Engine Matching by Registration
M256 Specialists
Your Mercedes SLC200 Engine
Vehicle
Mercedes SLC200
Model
SLC
Variant
SLC200
Fuel
Petrol
Engine
M274
Capacity
2.0L I4
Generation
R172 (2016–2020)
Rebuild From
£2,200
Not sure which engine you have?
The SLC200 uses the M256 3.0-litre inline-six mild-hybrid engine — enter your registration below and we'll confirm your exact spec before you get a quote.
DVLA & VIN verified
100% secure & private
No obligation quote
Mercedes SLC200Engine Rebuild Price
Starting From £2,200
Engine Code
M256Rebuild From
£3,200
Generation
R190 (2023–present)
Exact price depends on condition and parts required — submit your reg for a fixed-price quote.
Mercedes SLC200 Timing Chain Wear (M274)
If your SLC200 has the M274 4-cylinder petrol engine — which is the only engine used in the SLC200 across its full 2016–2020 production run — timing chain wear is an established pattern on this engine family, shared with the wider M270/M274 family used across C-Class models of the same era.
We replace the timing chain, bearings and gaskets as standard on every M274 rebuild.
Source: established specialist pattern (per G-BRF, confirmed in original model page build). This issue applies to the M274 engine as used in the SLC200
Mercedes SLC200ENGINE OPTIONS
Every SLC200 is different. That's why we offer the right solution for your engine, your car and your budget.
REBUILDING YOUR SLC200 ENGINE
We rebuild the engine your SLC200 already has instead of selling you a used engine of unknown history — strip it down, pressure-test it, and replace every worn or damaged component (timing chains, bearings, water pump, gaskets) with updated OEM parts. Near-new performance with a 12-month unlimited-mileage warranty.
From £3,200RECONDITIONED SLC200 ENGINES
A full strip-down, inspection and replacement of worn parts rather than a straight swap. If that's what you're after, our rebuild service is exactly that.
Learn moreREFURBISHED SLC200 ENGINES
Restoring your existing engine to full working condition rather than replacing it outright. Our rebuild service covers this.
Learn moreREMANUFACTURED SLC200 ENGINES
Built to original specification with updated components. That's consistent with what our rebuild service delivers on the M256.
Learn moreREPLACEMENT SLC200 ENGINES
If your existing engine is beyond economical repair, we offer complete engine replacement and fitting – sourced and fitted by our team, with the same 12-month warranty.
Learn moreUSED SLC200 ENGINES
Matched low-mileage used engines for when time is critical. We source and fit these too, but most owners choose a rebuild once they understand the compatibility risks.
Learn moreNOT SURE WHICH OPTION IS RIGHT FOR YOU?
Enter your registration below and we'll confirm your M256 and talk you through the best solution for your SLC200, honestly.
Ask About Your Options
OUR WORKSHOP
01RECOVERY COLLECTION
02M256 ENGINE STRIPPED FOR REBUILD INSPECTION
03VALVE COVERS & COOLANT COMPONENT WORK
04TECHNICIANS AT WORK
05ENGINE TESTING (RIG)
06COMPLETED & READY FOR REFIT
Real photos from our workshop — not stock imagery. This is what a genuine Mercedes SLC200 rebuild looks like.
Mercedes SLC200 ENGINE REBUILD PROCESS
WHAT MERCEDES SLC200 OWNERS SAY
WE COVER YOUREXACT VEHICLE
Enter your registration below and we'll confirm your SLC200 has the M256, along with an exact rebuild price.
WHY MERCEDES SLC200 OWNERS CHOOSE US
Engine matched using VIN or registration number — confirms your M274 engine before you're quoted
Genuine specialist workshop — not a broker
Specialist technicians with 10-15 years of experience
We don't swap your engine for an unknown used unit
Nationwide recovery, workshop rebuild
12 month unlimited-mileage warranty
All engine ancillaries serviced as part of the rebuild
Trade & public enquiries welcome
Dedicated advisor from quote to fit
OUR MOST RECENTMERCEDES RECOVERIES & REBUILDS
Real vehicles brought into our workshop. Open bonnets, stripped blocks, and cars ready for collection — this is what genuine engine work looks like.
Mercedes SLC200
RECOVERY
Mercedes SLC 63
DIAGNOSTICS
Mercedes SLC
STRIPPED ENGINE
Mercedes SLC S
TIMING CHAIN REPLACEMENT
Mercedes SLC200
IN FOR REBUILD
Mercedes SLC C
REBUILD IN PROGRESS
HOW IT WORKS
SEND YOURREGISTRATION
RECEIVE YOURFIXED-PRICE QUOTE
WE RECOVERYOUR CAR
REBUILD &REFIT
Most SLC models are recovered within a few hours of booking. Most rebuilds are completed within 3-5 working days.
Workshop slots fill up fast — book your recovery today.
LOOKING FOR A USED ORREPLACEMENT ENGINEINSTEAD?
We supply low-mileage, VIN-matched used units too, and offer full replacement and fitting. However, most SLC200 owners choose a rebuild once they realise it removes compatibility risk and works out more cost-effective over the life of the car.
Enter your reg below — we'll show you every option, honestly.
ABOUT THE MERCEDES SLC200 ENGINE
The SLC200 uses the M274 — a 2.0-litre turbocharged petrol 4-cylinder. It was fitted from 2016 to 2020 across the single R172 generation, which was itself the successor to the SLK. The SLC range was discontinued after this generation with no direct replacement, making the SLC200 one of a relatively short-lived but still widely owned model line. The M274 engine is shared with the C-Class of the same era, which is why its known wear patterns are well documented in specialist circles.
We continue to rebuild and replace M256 engines for every SLC200 on the road.
MERCEDES SLC200 ENGINE CODES
M256 (R190, 2023–present)
A 3.0-litre inline-six petrol mild-hybrid engine fitted to the SLC200 from 2023 to present. The M256 features an integrated starter-generator (ISG) and electric auxiliary compressor, making it a more modern and efficient design than the older M276 V6. We replace timing chains, bearings, water pump and gaskets as standard on every M256 rebuild.
Check Your M256 SLC200MERCEDES SLC200 ENGINE COMPATIBILITY
The SLC200 uses a single engine — the M274 2.0-litre turbocharged petrol 4-cylinder — across its entire production run. Before we quote or supply anything, we confirm:
Your exact engine code (M256) via registration or VIN
Your generation (R190)
Drivetrain and ancillary specification
Any electronics or ECU considerations specific to your exact build
This is why we always start with your registration rather than a generic SLC quote — it protects you from paying for parts that don't fit your actual car.
MERCEDES SLC200 APPLICATIONS BY GENERATION
Generation
Chassis
Years
Engine Code
Fuel
MERCEDES SLC200 ENGINES BY YEAR
From the R190's launch in 2023, the SLC200 has used the M256 3.0-litre inline-six mild hybrid throughout. If you're unsure of your exact spec, we'll confirm it before you book.
The M256 has been fitted to every SLC200 since launch — if your registration year isn't listed above, get in touch and we'll confirm availability directly against your reg.
WE COVER EVERY MERCEDES SLC200 MODEL YEAR:
Mercedes SLC200
2016 Engine Rebuild
Mercedes SLC200
2017 Engine Rebuild
Mercedes SLC200
2018 Engine Rebuild
Mercedes SLC200
2019 Engine Rebuild
Mercedes SLC200
2020 Engine Rebuild
If your registration year isn't listed above, get in touch — we'll confirm availability directly against your reg.
MERCEDES SLC200 ENGINE COSTS
A Mercedes SLC200 engine rebuild starts from
£2,200
A full replacement engine and fitting service is also available. Exact pricing depends on the condition of your existing engine and the parts required — submit your registration for a fixed-price quote within 30 minutes.
12 MONTH
UNLIMITED-MILEAGE
WARRANTY
MERCEDES SLC200 ENGINE SIZES
• Mercedes SLC200 3.0 Litre Engine (M256, I6)
MERCEDES SLC200 FUEL TYPES
• Mercedes SLC200 Petrol Mild Hybrid Engine Rebuilds
RELATED MERCEDES SLC VARIANTS
Most Mercedes SLC engine rebuilds are completed within 3-5 working days.
Nationwide recovery and collection available for all SLC models.